 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| BT131 series Triacs logic level Rev. 08 -- 9 September 2005 Product data sheet 1. Product profile 1.1 General description Passivated, sensitive gate triacs in a SOT54 plastic package 1.2 Features s Designed to be interfaced directly to microcontrollers, logic integrated circuits and other low power gate trigger circuits. 1.3 Applications s General purpose switching and phase control 1.4 Quick reference data s VDRM 600 V (BT131-600) s VDRM 800 V (BT131-800) s IT(RMS) 1 A s ITSM 12.5 A 2. Pinning information Table 1: Pin 1 2 3 Pinning Description main terminal 2 (T2) gate (G) main terminal 1 (T1) T2 sym051 Simplified outline Symbol T1 G 321 SOT54 (TO-92) Philips Semiconductors BT131 series Triacs logic level 3. Ordering information Table 2: Ordering information Package Name BT131-600 BT131-800 TO-92 Description plastic single-ended leaded (through hole) package; 3 leads Version SOT54 Type number 4. Limiting values Table 3: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol VDRM Parameter repetitive peak off-state voltage BT131-600 BT131-800 IT(RMS) RMS on-state current all conduction angles; Tlead = 51.2 C; see Figure 1, 4 and 5 half sine wave; Tj = 25 C prior to surge; see Figure 2 and 3 t = 20 ms t = 16.7 ms I2t dIT/dt I2t for fusing rate of rise of on-state current t = 10 ms ITM = 1.5 A; IG = 20 mA; dIG/dt = 200 mA/s T2+ G+ T2+ G- T2- G- T2- G+ IGM PGM PG(AV) Tstg Tj [1] [1] Conditions Min - Max 600 800 1 Unit V V A ITSM non-repetitive peak on-state current - 12.5 13.8 1.28 A A A2s - 50 50 50 10 2 5 0.1 +150 125 A/s A/s A/s A/s A W W C C peak gate current peak gate power average gate power storage temperature junction temperature over any 20 ms period -40 - Although not recommended, off-state voltages up to 800 V may be applied without damage, but the triac may switch to the on-state. The rate of rise of current should not exceed 3 A/s. BT131_SER_8 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 08 -- 9 September 2005 2 of 12 Philips Semiconductors BT131 series Triacs logic level 1.5 Ptot (W) 1 003aab038 35 Tlead(max) (C) 65 =180 120 90 60 30 0.5 95 0 0 0.2 0.4 0.6 0.8 1 IT(RMS) (A) 1.2 125 a = form factor = IT(RMS)/IT(AV) Fig 1. Total power dissipation as a function of average on-state current; maximum values 16 ITSM (A) 12 T Tj = 25 C max 8 IT 003aab041 ITSM t 4 0 1 10 102 n 103 f = 50 Hz Fig 2. Non-repetitive peak on-state current as a function of the number of sinusoidal current cycles; maximum values BT131_SER_8 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 08 -- 9 September 2005 3 of 12 Philips Semiconductors BT131 series Triacs logic level 103 IT ITSM (A) 003aab040 ITSM t T Tj = 25 C max 102 (1) (2) 10 10-5 10-4 10-3 10-2 tp (s) 10-1 tp 20 ms (1) dIT/dt limit (2) T2- G+ quadrant Fig 3. Non-repetitive peak on-state current as a function of pulse width for sinusoidal currents; maximum values 003aab042 3 IT(RMS) (A) 1.2 IT(RMS) (A) 0.8 51.2 C 003aab039 2 1 0.4 0 10-2 10-1 1 10 surge duration (s) 0 -50 0 50 100 150 Tlead (C) f = 50 Hz; Tlead 51.2 C (1) Tlead = 51.2 C Fig 4. RMS on-state current as a function of surge duration, for sinusoidal currents; maximum values Fig 5. RMS on-state current as a function of lead temperature; maximum values BT131_SER_8 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 08 -- 9 September 2005 4 of 12 Philips Semiconductors BT131 series Triacs logic level 5. Thermal characteristics Table 4: Symbol Rth(j-lead) Rth(j-a) Thermal characteristics Parameter Conditions Min [1] Typ 150 Max 60 80 - Unit K/W K/W K/W thermal resistance from junction to full cycle lead half cycle thermal resistance from junction to see Figure 6 ambient - [1] Mounted on a printed-circuit board; lead length = 4 mm 102 Zth(j-lead) (K/W) 10 (1) 003aab045 1 (2) PD 10-1 tp t 10-2 10-5 10-4 10-3 10-2 10-1 1 tp (s) 10 (1) half cycle (2) full cycle Fig 6. Transient thermal impedance as a function of pulse width BT131_SER_8 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 08 -- 9 September 2005 5 of 12 Philips Semiconductors BT131 series Triacs logic level 6. Characteristics Table 5: Characteristics Tj = 25 C unless otherwise stated. Symbol IGT Parameter gate trigger current Conditions VD = 12 V; IT = 100 mA; see Figure 8 T2+ G+ T2+ G- T2- G- T2- G+ IL latching current VD = 12 V; IGT = 100 mA; see Figure 10 T2+ G+ T2+ G- T2- G- T2- G+ IH VT VGT holding current on-state voltage gate trigger voltage VD = 12 V; IGT = 100 mA; see Figure 11 IT = 1.4 A; see Figure 9 IT = 10 mA; gate open circuit; see Figure 7 VD = 12 V; IGT = 100 mA VD = 400 V; IGT = 100 mA; Tj = 125 C ID dVD/dt off-state current VD = VDRM(max); Tj = 125 C Dynamic characteristics rate of rise of off-state VDM = 67 % VDRM(max); Tj = 125 C; voltage exponential waveform; RGK = 1 k; see Figure 12 rate of change of commutating current gate-controlled turn-on time VDM = 400 V; Tj = 125 C; dIcom/dt = 0.5 A/ms ITM = 1.5 A; VD = VDRM(max); IG = 100 mA; dIG/dt = 5 A/s 10 20 V/s 0.2 0.7 0.3 0.1 1.5 0.5 V V mA 1.2 4 1 2.5 1.3 1.2 5 8 5 8 5 1.5 mA mA mA mA mA V 0.4 1.3 1.4 3.8 3 3 3 7 mA mA mA mA Min Typ Max Unit Static characteristics dVcom/dt tgt 2 - 2 - V/s s BT131_SER_8 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 08 -- 9 September 2005 6 of 12 Philips Semiconductors BT131 series Triacs logic level 1.6 VGT(Tj) VGT(25C) 1.2 003aab043 3 IGT(Tj) IGT(25C) (1) 003aab044 2 (2) (3) (4) 0.8 1 (4) (3) (2) (1) 0.4 -50 0 50 100 Tj (C) 150 0 -50 0 50 100 Tj (C) 150 (1) T2- G+ (2) T2- G- (3) T2+ G- (4) T2+ G+ Fig 7. Normalized gate trigger voltage as a function of junction temperature Fig 8. Normalized gate trigger current as a function of junction temperature 3 IL(Tj) IL(25C) 2 001aab100 2 IT (A) 1.6 003aab037 1.2 0.8 (1) (2) (3) 1 0.4 0 0 0.4 0.8 1.2 1.6 VT (V) 2 0 -50 0 50 100 Tj (C) 150 Vo = 0.92 V Rs = 0.4 . (1) Tj = 125 C; typical values (2) Tj = 125 C; maximum values (3) Tj = 25 C; maximum values Fig 9. On-state current characteristics Fig 10. Normalized latching current as a function of junction temperature BT131_SER_8 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 08 -- 9 September 2005 7 of 12 Philips Semiconductors BT131 series Triacs logic level 3 IH(Tj) IH(25C) 2 001aab099 103 dVD/dt (V/s) 102 003aab046 1 10 0 -50 0 50 100 Tj (C) 150 1 0 50 100 Tj (C) 150 Fig 11. Normalized holding current as a function of junction temperature Fig 12. Rate of rise of off-state voltage as a function of junction temperature; minimum values 7. Package information Epoxy meets requirements of UL94 V-0 at 18 inch. BT131_SER_8 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 08 -- 9 September 2005 8 of 12 Philips Semiconductors BT131 series Triacs logic level 8. Package outline Plastic single-ended leaded (through hole) package; 3 leads SOT54 c E d A L b 1 D 2 e1 e 3 b1 L1 0 2.5 scale 5 mm DIMENSIONS (mm are the original dimensions) UNIT mm A 5.2 5.0 b 0.48 0.40 b1 0.66 0.55 c 0.45 0.38 D 4.8 4.4 d 1.7 1.4 E 4.2 3.6 e 2.54 e1 1.27 L 14.5 12.7 L1(1) max. 2.5 Note 1. Terminal dimensions within this zone are uncontrolled to allow for flow of plastic and terminal irregularities. OUTLINE VERSION SOT54 REFERENCES IEC JEDEC TO-92 JEITA SC-43A EUROPEAN PROJECTION ISSUE DATE 04-06-28 04-11-16 Fig 13. Package outline SOT54 (TO-92) BT131_SER_8 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 08 -- 9 September 2005 9 of 12 Philips Semiconductors BT131 series Triacs logic level 9. Revision history Table 6: Revision history Release date 20050909 Data sheet status Product data sheet Change notice Doc. number Supersedes BT131_SER_7 Document ID BT131_SER_8 Modifications: * * The format of this data sheet has been redesigned to comply with the new presentation and information standard of Philips Semiconductors. Figure 5: corrected Product specification Product specification Product specification Product specification Product specification BT131_SER_6 BT131_SER_5 BT131_SER_4 BT131_SER_3 - BT131_SER_7 BT131_SER_6 BT131_SER_5 BT131_SER_4 BT131_SER_3 20040101 20030801 20001201 20000501 19980401 BT131_SER_8 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 08 -- 9 September 2005 10 of 12 Philips Semiconductors BT131 series Triacs logic level 10. Data sheet status Level I II Data sheet status [1] Objective data Preliminary data Product status [2] [3] Development Qualification Definition This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). III Product data Production [1] [2] [3] Please consult the most recently issued data sheet before initiating or completing a design. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 11. Definitions Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 13. Trademarks Notice -- All referenced brands, product names, service names and trademarks are the property of their respective owners. 12. Disclaimers Life support -- These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors 14. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com BT131_SER_8 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 08 -- 9 September 2005 11 of 12 Philips Semiconductors BT131 series Triacs logic level 15. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 14 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description. . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Thermal characteristics. . . . . . . . . . . . . . . . . . . 5 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Package information . . . . . . . . . . . . . . . . . . . . . 8 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 10 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 11 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Contact information . . . . . . . . . . . . . . . . . . . . 11 (c) Koninklijke Philips Electronics N.V. 2005 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 9 September 2005 Document number: BT131_SER_8 Published in The Netherlands |
Price & Availability of BT131-800E
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |